Top 10 Best pump for pool cover in 2022 Comparison Table
- 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
- Tough thermoplastic construction; 10' cord length
- 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
- Removable suction screen and handles up to 1/8 inch solids
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
- Specs & Dimensions: 4.1*2.6*3.5 inches; The 6.5 ft. long power cord offers convenient installation and an adjustable knob allows you to control of water flow rate and pressure; Max flow rate: 800 GPH (3000L/H); Max lift height: up to 10 ft.; Wattage: 24W; Voltage: 110-120V
- Detachable & Cleanable: This powerful yet small-sized water pump is easy to hide and disguise; No tools necessary for disassembly and it’s very easy to clean
- Many Possible Placement Positions: Place the pump flat on its base, stick it on an angled or vertical surface, and manually rotate it into any position you need
- Wide Range of Applications: This is a high-performance, energy-efficient pump and is well-designed for use in ponds, fountains, waterfalls, hydroponic systems, and irrigation systems and so on; Working Temperature: 32℉ to 104℉
- 3 Outlet Adapters：Includes three nozzles with different diameter sizes: 0.51 in., 0.62 in., and 0.74 in., providing different water flow effects for all your different needs
- 【AUTOMATIC ON/OFF SWITCH 】 Acquaer pool cover pump has a automatic switch. It will automatically turn on when water has been detected at 2 ''. When the pump remove water to approximately 2/5 ", the pump will run for additional 60 seconds and then turn off.
- 【REMOVE WATER EFFICIENTLY】1/4 HP pool cover pump moves up to 2250 gallons per hour, which drains up to 2 times faster than a standard pump. Bottom suction design can remove water down to 1/4 ". Great for removing water from pools, pool covers, tarps, window wells, hot tubs, boat covers, rooftops, spas and more.
- 【SUPERIOR DESIGN】The submersible pump with strainer base is easy to clean without tools or screws. Strainer base protects the pool cover, filters debris and keeps the pump stable. Built-in temperature control core prevents the motor from dry burning when in short of water and protects the water pump from damage.
- 【GOOD COMPATIBILITY】 Equipped with 25 ft three-prong plug power cord, which could plug into any standard 110 wall outout; 1-1/4” NPT discharge and 3/4” garden hose adapter with check valve provide more convenience to operate and use.
- 【WHAT YOU GET】- Package includes pool cover pump, a 3/4" check valve adapter and a manual. This pool cover pump comes with 3-year warranty. Please do not hesitate to contact our Service Team, we are here to help for any concerns within 24 hours.
- UL Certified & WATER FLOW CONTROL -- Our water pump meet UL 1081standard. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 550GPH (2000L/H).
- STRONG POWER & HIGH LIFT -- Max Lift Height: 7.2ft. Model number is SML-630. 30W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly).
- 3 NOZZLES -- Each water pump has 3 nozzles for option: 0.51"/0.62"/0.75". Provide a different water flow as you desired. Threaded fittings make it more stable. Detachable and cleanable.
- SUCTION CUP & 5.9FT POWER CORD -- Long enough cord for easy installation. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
- WIDELY APPLIED -- Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.
- APPLICATIONS: designed for automatic removal of water from pool covers, boat covers or rooftops - pump activates in 2-inches of water and shuts off when water drops to 1-inch
- EASY MAINTENANCE: access to pump float and air lock for cleaning; requires no tools or screws; see video for demonstration
- WELL DESIGNED: ergonomically built-in handle for portability and ease of placement and removal; compact weighted design for stability
- EASY SET-UP: 1-inch FNPT discharge with 3/4-inch garden hose adapter included to fit standard 3/4 garden hose; convenient 25-foot power cord ensures easy-reach of power source in most installations
- SPECIFICATIONS: 115 Volts; 60 Hz; 2.2 Amps; 270 Watts; 1/3 HP; 1700 GPH at 1-ft. lift; 21.5-ft. shutoff; 1-inch FNPT discharge with 3/4-inch garden hose adapter; integrated float switch; 25-ft. cord
- Designed for both in ground and above ground pools. Durable, lightweight chassis will not weigh down pool covers
- Pumps at a rate of up to 600 gallons per hour
- 16 foot power cord plugs into any standard 110 volt wall outlet
- 22 foot heavy duty kink-proof hose easily removes water from any pool depth
- 75 Watts motor, Manual shut off
- AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers
- HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor; CSA listed in the USA and Canada
- BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards
- PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow
- SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord; maximum water temperature: 140 F, equipped with safety switch
- Professional Drainage - EDOU Swimming Pool Cover Pump Kit is designed to be a convenient, easy to set up, affordable drainage for accumulated water. Not intended for full submersion.
- High Efficiency - Energy and time-saving pool cover pump drains 1.5X faster, up to 850 gallons per hour.
- High Quality - Easily filter out dirt with customized ABS casing. Features temperature control and manual shut-off.
- Good Compatibility - Includes 2 adapters for 3/4 inch garden and drain hose and 25 feet power cord for 110V wall outlet.
- Excellent Value and Customer Service - Includes pool cover pump, hose and adapters. Also comes with 24-hour lifetime professional customer support.
- [✔Efficient Solar Panel]: AISITIN 2.5W Solar bird bath fountain is powered by solar energy. High-efficiency solar panels work immediately when placed in the sun. The more sunlight, the better the effect, and the fountain will bring you unexpected beauty.
- [✔Six spray patterns]: Solar water fountain contains 6 different nozzles, which will produce different spray shapes and spray patterns. The height can be adjusted by replacing the nozzles to avoid splashing out of the basin. The spray height can reach 15-27 inch. You can easily replace the nozzle.
- [✔Eco-friendly And Multi-purpose]: This solar powered fountain pump does not need any power battery, no additional power supply, very environmentally friendly. This environmentally friendly solar fountain pump has a diameter of 6.7 ", which is very suitable for bird baths, fish tanks, ponds, swimming pools, gardens, outdoors, and oxygen circulating water. This fountain will attract hummingbirds and it is very interesting.
- [✔Easy To Use]: Just put the solar fountain under the sun, it will start spraying water.The suction cups at the bottom effectively hold the fountain so it doesn't float around in the birdbath. This fountain does not require complicated installation, nor does it require much maintenance.
- [✔Usage advice]: Make sure you have poured enough water into the basin so that the pump can fall completely underwater. You should clean the pump regularly to avoid clogging with dust. The solar panel needs to be kept clean, and the shading of leaves or stains will affect the conversion of solar energy.. It does not store any energy, so it will rest at night to ensure a longer life.
- Drill Pump will not turn by hand, it must be chucked to the drill
- Drill Pump must be mounted for proper usage, do not hold in hand
- 3/8” shank on this unit fits all common chucks
- 3/4″ hose connection, for use with standard garden hose
- Unit pumps up to 750 gallons per hour
Our Best Choice: SurmountWay Pool Cover Pump Above Ground，850 GPH, 3 Adapters Swimming Pool Cover Pump with 16 Foot Heavy-Duty Kink Proof Hose（Blue）
Flow Rate:850 GPH
Power Cord Length:25FT
Drain Hose Length:16FT
Overall Dimension: 5.9×4.7×5.1inches
Pool Cover Pumps are used to remove water from your pool’s cover and make it easier to open/close your pool. Water on a pool cover, can be very heavy and cause cover rips and tears if not careful.
Surmountway pool cover pumps help safeguard and protect the pool cover from the prolonged accumulation of rain or melting snow.
It is lightweight and submersible, and will pump up to 850 gallons of water per hour!
Features different size inlet and stabilizing base platform, standard with the Surmountway. Comes complete with garden hose adapter,16ft drain hose and 25ft power cord.
Protect your investment with a SurmountWay pool cover pump.
Flexible hose for drain application
Drain hose is made of high quality PVC material, thick and flexible enough to prevent kinks.It’s clear for easy monitoring of fluid flow, smooth interior and exterior that prevents sediment accumulation and allows easy flow and flushing.
3 oulet adapters
This water pump comes with 3 nozzles for option: 0.5″/0.75″/0.75″ hose adapter.
Provide a different water flow as you desired.
Designed to drain water from a variety of environments. it’s ideal for draining standing water from swimming pools, fountains, typical residential or commercial water transfer applications.
STURDY MATERIAL: Made of enhanced ABS, durable to use, can withstand bad weather, rust and impact meanwhile easily filter out dirt and remove the accumulated water from pool covers.
SAFETY DESIGN: Securely deisnged with a built-in temperature control core with high sensitivity, equipped with a dry burning prevention function when lacking water, safe and reliable.
HIGH-PERFORMANCE: The pump is so powerful that it flows up to 850 gallons per hour, faster than a standard drain pump. Energy efficient and time saving.
PRACTICAL DRAINAGE: Simple to set up and can drain off the standing water conveniently, useful for both above ground and in ground pools. Ideal for household water transfer applications, providing you with an affordable drainage solution.
SIZE: 5.1*6.3*4.7 in; PACKAGE INCLUDING: 1PC Pool Cover Pump, 1PC Drain Hose, 3PCS Water Nozzle Adapters. CUSTOMER SERVICE: If you have any question, please feel free to contact us and we will try our best to serve you.