Top 10 Rated centrifugal water pump in 2022 Comparison Table
- 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
- Tough thermoplastic construction; 10' cord length
- 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
- Removable suction screen and handles up to 1/8 inch solids
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
- The Hayward PowerFlo LX Single-Speed 1.5 HP Pool Pump is designed specifically for the rigors of above-ground and on-ground pools
- Heavy-duty motor offers dependable performance, energy efficiency and quiet operation
- Durable, corrosion-proof housing for all-weather performance and quiet operation
- Extra-large debris basket with clear cover keeps pool maintenance to a minimum
- Drain plug provides easy maintenance of pump
- EASY TO USE: Simply Prime the pump with food-grade vegetable oil, place the intake hose attachment in the water, and plug it in!
- POWERFUL: The (115 Volt) 1/10 HorsePower motor, transfers water at a rate of up to 330 Gallons Per Hour!
- LIGHTWEIGHT & PORTABLE: Easy to store and haul, this mini utility pump offers big value in a little package
- MULTIPURPOSE: Perfect for transferring water from aquariums, washing machines, water beds, water heaters, clogged sinks, and more.
- INCLUDES: 6' hose and Water Suction attachment, as well as an impeller replacement kit
- (1)Diaphragm Pump,(1) set of instructions,(2) 1/2" barbed hose adaptors,(1) 50 mesh inlet strainer
- 3.0 Gallons Per Minute capacity flow, and 45 PSI pressure setting
- Self priming, smooth, silent operation and can run dry without damage
- Voltage: 12 VDC Dimensions: 7.84" X 5.00" X 4.62" Amps: 3.0 (6.0 Max. Amps)
- 4-Year Warranty
- ⚡⚡【Kindly Tip】When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.⚡⚡
- 🔥【1HP High Power】Prostormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time.
- 🔥【Multi Outlet Sizes】3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be.
- 🔥【Keep Open Mode】When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned.
- 🔥【Automatic ON/OFF Mode】The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.
- PREMIUM QUALITY: The drain pump motor is made of premium quality material, non OEM parts but meets OEM manufacturing requirements.
- PART NUMBER 4681EA2001T: Along with replacing part 4681EA2001T, this washer drain pump motor also replaces part numbers 2003273, 4681EA1007D, 4681EA1007G, 4681EA2001D, 4681EA2001N, 4681EA2001U, and AP5328388; （ ※ You can check out picture 6 for more models）
- FITS TOP NAME BRANDS: Work with most popular washer brands - LG, Sears, and Kenmore. Compatible model numbers include 48231009799, 48231010108, 79640021900, 79640272800, and 79640272900.
- FIX COMMON SYMPTOMS: Washer will not drain; washer pumps won’t spin; noisy cycles; washer leaks. Dear friends, use your brain and hands to make your machine work!
- AFTER SALE GUARANTEE: 100% money back guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with the product, Contact us! We will show you a sincere attitude and satisfactory solution.
- The patented design delivers smooth & consistent flow at all ranges of operation, while drawing low current
- Inlet and Outlet: 3/8-inch hose barb ports. Vertical Suction Lift: 6.6ft (2m). Adjustable CUT-OFF Pressure: Default 80-85PSI, MAX 100 PSI(5.5Bar). It doesn't mean 4.5L/min jet at 100PSI. Comes with 2 tube clamps
- The pump body is sealed to prevent incidental moisture and dust from entering. The pump can not run continuously more than 6 hours. Able to operate in a wet environment. Self priming function allows it to be mounted above water tank
- Sealed switches and electro coating to inhibit corrosion. Soft rubber mounting tabs to reduce vibrations. When installed correctly, Marine Duty Fresh Water Pumps provide years of quiet operation
- The pump in combination with a low backpressure water system can exceed all expectations
- UL 778 & CSA 22.2 Certified
- Self-Priming up to 6 vertical feet
- 3.3 GPM Flow Capacity, 115V AC Current Draw .75 amps (1.2 Max Amps)
- Built-in Adjustable Pressure Switch that turns on/off at 45 PSI
- Plugs into standard wall outlet with pre-installed power plug
- PROFESSIONAL POND WATER PUMP: Submersible water pump keeps water always flowing and works on land or fully submerged in water. Perfect for ponds, fountains, waterfalls and filtration systems!
- DURABLE PUMP CONSTRUCTION: Oil-free design with ceramic impeller shafts provides a reliable, long-lasting fountain water pump that resists damage, keeps water flowing, and has a GPH of 3100
- ENERGY SAVING WATER PUMP: Features an energy-saving design that will save you money, while providing an eco-friendly and efficient water pump system that's good for the environment
- EASY INSTALLATION: Pump can be used vertically or horizontally for convenient placement in your pond, and has a 33' long cord for easy placement and accessibility
- EASY MAINTENANCE AND IDEAL SIZE: Includes a large pre-filter for easy disassembly and ease of replacement, and pump measures 10.8"L x 6.1" W x 8.9"H for use in ponds up to 33' wide
- ✅ 【365 DAYS WARRANTY】- OEM 4681EA2001T L-G Drain Pump supports 365 DAYS RETURN and EXCHANGE.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit.
- ✅ 【PRODUCT SPECIFICATIONS】- ①4681EA2001T M3379-65468 Front load washer drain pump motor rated voltage is 120V-127V 60Hz 85W 1.4A 45L / Min.②Geniue Original version (OEM), drain pump 4681EA2001T is made of premium quality materialafter many factory inspections. Drain pump 4681EA2001T removes water from the washer during the drain portion of the cycle, the product quality can completely satisfy customers Complete pump and motor assembly along with removable filter housing for easier cleaning.
- ✅ 【WIDE COMPATIBILITY】- The product L-G Washing Machine Drain Pump Motor 4681EA2001T can work for Ken-more L-G Washer.Replaces part numbers 4681EA1007D, 4681EA1007G, 4681EA2001D, 4681EA2001N, 4681EA2001U, 2003273, AP5328388, PS3579318, EAP3579318.If you are not sure if your washing machine model is suitable, please contact us!
- ✅ 【PACKAGE INCLUDES】- Includes 1 x 4681EA2001T Front load washer drain pump motor (OEM Part). If the washer does not drain, washer pumps won’t spin, noisy cycles or washer leaks then the 4681EA2001T drain pump may be clogged, damaged, or defective.You made to replace the 4681EA2001T Washer Drain Pump Motor.
- ✅ 【DIY INSTALLATION】--- Before installing 4681EA2001T Washer Drain Pump, you should prepare a Nut driver, screw driver and locking pliers, and disconnect the power and water supply. Remove the drain cover on the cleaner, disconnect the wiring harness and two hoses on the drain pump assembly. Two washers on the tilted back leg. Loosen the two screws and disassemble the drain pump. Install a new one and tighten the screws.Connect hoses, wiring harnesses and gaskets.
Our Best Choice: AUBIG DC40-1250 Brushless Magnetic Drive Centrifugal Submersible Water Pump CPU Cooling DC12V 1A 500L/H 5.0M 14.40W
Item dimension: 83*63*48mm
Working at rated voltage (DC12V/1.0A ). The positive pole is red wire, the negative pole is black wire/blue wire.
This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
When blocking, long-running is not allowed.
Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head.
The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Submersible installation and entirely waterproof
Max working temperature: 60°C/172F
High efficiency, low consumption, low noise