How to start motherboard with screwdriver?

Starting a motherboard with a screwdriver is a useful troubleshooting technique that can come in handy when you encounter problems with your computer’s power button or switch. Although it may sound a bit unconventional, this method allows you to power on your motherboard and determine if the issue lies with the power button or another component. In this article, we will guide you through the steps to correctly start a motherboard using a screwdriver.

What You Will Need

Before you begin, gather the following items:
– A Phillips-head screwdriver
– A well-lit and static-free workspace
– Patience

The Steps to Start a Motherboard with a Screwdriver

Step 1: Preparing for the Process

Make sure your computer is properly shut down and disconnected from any power source before attempting this procedure.

Step 2: Identifying the Power Pins

Look for the front panel header on your motherboard. It is typically found near the bottom of the motherboard and is labeled with abbreviations such as PW_SW, PWR_BTN, or similar.

Step 3: Locating the Positive (+) and Negative (-) Pins

Refer to your motherboard’s manual and identify the power button pins. These pins are usually adjacent and are labeled as P+ and P- or have a small arrow indicating the positive side.

Step 4: Preparing the Screwdriver

Take your screwdriver and ensure that it has a plastic or rubber handle to prevent any conductive materials from coming into contact with the motherboard.

Step 5: Powering On the Motherboard

Using the plastic or rubber handle of the screwdriver, gently touch both the positive (+) and negative (-) pins simultaneously for a brief moment. This action mimics pressing the power button and will turn on the motherboard. Keep in mind that the effects will solely power on the motherboard and not the entire computer system.


Q1: Can starting a motherboard with a screwdriver damage it?

A1: No, starting your motherboard with a screwdriver will not damage it if done correctly. However, you should avoid using metallic screwdrivers or applying excessive force.

Q2: Can I replace my power button with this method?

A2: No, this method only allows you to power on the motherboard temporarily. It does not provide a permanent solution to a faulty power button.

Q3: Why would I want to start my motherboard with a screwdriver?

A3: Starting your motherboard with a screwdriver is a troubleshooting technique used to verify if the power button is faulty or if the issue lies elsewhere in your computer system.

Q4: Is this method applicable to all motherboards?

A4: Yes, this method works for most motherboards since they typically have similar front panel headers and power pins.

Q5: Are there any risks involved in this procedure?

A5: As long as you follow the instructions carefully and use a non-conductive screwdriver, the risks are minimal. However, if you have any concerns, it is always best to consult a professional.

Q6: Will this method turn on the entire computer system?

A6: No, applying this method will only power on the motherboard. The remaining components, such as the CPU, RAM, and peripherals, will not be activated through this method alone.

Q7: Can this method help diagnose power button issues?

A7: Yes, if you suspect that your power button is malfunctioning, starting your motherboard with a screwdriver can help determine if the power button is the culprit or if another component is causing the problem.

Q8: What if my motherboard does not power on with this method?

A8: If your motherboard does not power on using the screwdriver method, there may be other underlying issues, such as a failing power supply or defective motherboard. It is recommended to seek professional assistance in such cases.

Q9: How long do I need to touch the power pins with the screwdriver?

A9: To turn on the motherboard, a brief touch of a second or two is sufficient. No need to hold the screwdriver on the pins for an extended period.

Q10: Can I start the motherboard using any conductive object?

A10: While you can technically use other conductive objects, it is safer to use a screwdriver with an insulated handle to minimize the risk of accidental damage due to conductivity.

Q11: Can this method fix a motherboard that does not power on?

A11: Starting your motherboard with a screwdriver can help determine whether the power button is causing the issue, but it may not necessarily fix the underlying problem. Further troubleshooting or professional assistance may be required.

Q12: How often should I use this method?

A12: Starting your motherboard with a screwdriver should only be used as a temporary troubleshooting technique. It is not recommended for daily use; instead, resolve the underlying issue causing the power button problem for a lasting solution.

Remember, using a screwdriver to start your motherboard is a temporary solution and not a permanent fix. If you find that your power button consistently fails to function, it is advisable to consult a computer technician or replace the faulty component.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top