How to get stripped screw out of laptop?

How to Get Stripped Screw Out of Laptop?

Stripped screws can be a frustrating problem when it comes to repairing your laptop. Whether you’re replacing a part or simply trying to open the case, a stripped screw can bring everything to a screeching halt. However, with a few simple techniques and tools, you can successfully remove that problematic stripped screw without causing any damage to your laptop.

But first, let’s address the burning question: **How to get a stripped screw out of a laptop?** The following steps will guide you through the process:

1. **Assess the situation**: Determine the size and type of screwdriver needed for the stripped screw. Ensure you have the correct tools on hand before proceeding.

2. **Use rubber bands**: Place a wide rubber band over the head of the stripped screw, ensuring it covers the entire area. Insert the screwdriver into the screw, applying firm pressure while turning it counterclockwise. The rubber band enhances grip, making it easier to unscrew the stripped screw.

3. **Try a screw extractor**: Screw extractors are specifically designed to remove stripped screws. Select an extractor that matches the size of the stripped screw and follow the instructions provided with the tool. Insert the extractor, turn it counterclockwise, and it will catch on the screw, allowing for easy removal.

4. **Drilling method**: If the above methods fail, you can resort to drilling. Start by selecting a drill bit slightly smaller than the screw head, and drill into the center of the stripped screw. As you apply downward pressure, the screw should loosen, enabling you to remove it.

5. **Use a hammer and chisel**: This method should be used as a last resort as it carries a higher risk of damaging the surrounding components. Place the chisel against the edge of the stripped screw and tap it gently with a hammer in the counterclockwise direction. The shock and force should cause the screw to rotate, allowing for extraction.

6. **Heat the screw**: In some cases, heating the screw can expand the metal and loosen its grip. Use a soldering iron or a heated screwdriver tip to heat the screw head for a few seconds before attempting to remove it with a screwdriver.

7. **Super glue**: Apply a small amount of glue to a screwdriver or a hex key that fits into the stripped screw head. Hold it in place for a few minutes to allow the glue to bond, and then use the tool to turn the screw counterclockwise and remove it.

8. **Pliers or needle-nose pliers**: If the screw has enough of a protrusion, use pliers or needle-nose pliers to grip the exposed part firmly. Rotate the pliers counterclockwise to remove the screw.

9. **Tapping method**: Insert the screwdriver into the screw and tap it gently with a hammer. The vibrations can help loosen the screw, allowing for its removal.

10. **Use a rotary tool**: A rotary tool with a cutting disc can be employed as a last-ditch effort. Carefully cut a groove into the head of the stripped screw, ensuring you stay centered. Once the groove is deep enough, use a flathead screwdriver to turn the screw counterclockwise and remove it.

Now that we have addressed the main question, here are answers to some frequently asked questions (FAQs) related to removing stripped screws from laptops:



Can I use pliers to grip the stripped screw?

Yes, if the screw protrudes enough, you can grip it with pliers and turn it counterclockwise to remove it.


What if all the above methods fail?

If all else fails, you can take your laptop to a professional technician who will have the necessary tools and expertise to remove the stripped screw without causing any damage.


Is it safe to heat the screw?

Heating the screw can be effective, but be cautious not to overheat and damage any surrounding components.


Can I use WD-40 or other lubricants?

Lubricants like WD-40 can help, but they may damage certain plastic components in the laptop. Use them sparingly and carefully.


How can I prevent stripping screws in the future?

To prevent stripped screws, always use the correct-sized screwdriver, apply even pressure, and avoid excessive force when tightening or loosening screws.


What happens if I accidentally damage the laptop while removing the stripped screw?

If you accidentally damage the laptop, it’s imperative to seek professional repair assistance to prevent further complications.


Can I use a magnet to remove the stripped screw?

While a magnet might work if the screw is magnetic, it’s not always the most reliable method. It’s better to rely on the techniques mentioned earlier.


Should I use power tools to remove stripped screws?

Using power tools like electric screwdrivers can lead to further damage or stripping. It’s best to stick to manual tools and techniques.


Why are screws in laptops sometimes stripped?

Screws in laptops can become stripped due to over-tightening, incorrect tools, or low-quality screw heads. It’s important to be cautious and use proper techniques.


Will removing a stripped screw void my laptop warranty?

In most cases, removing a stripped screw won’t void the laptop warranty, but it’s always best to refer to the manufacturer’s warranty guidelines and seek professional assistance if unsure.


Can I use pliers or a wrench instead of a screwdriver?

While pliers or a wrench might provide additional grip, it’s best to use a screwdriver to ensure you have enough control and precision during the process.


Are there any specific screwdrivers designed for stripped screws?

There are specialized screwdrivers available on the market designed to remove stripped screws effectively. Consider using these tools if you frequently encounter stripped screws.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top